McIntosh MCC406M

Prezzo: 4200 €

# 50 watts x 4 + 100 watts x 2, 20-20kHz, 4 ohms, 0.005%THD
# 100 watts x 4 + 200 watts x 2, 20-20kHz, 2 ohms, 0.01%THD
# 50 Watt Channel Pairs Bridgeable for 200 watts
# 100 Watt Channels may be bridged for 400 watts
# S/N Ratio 105 dB
# High-Pass Filter
# Low-Pass Filter
# Subwoofer Filter
# Pulse Width Modulated Power Supply
# Balanced Noise Canceling Inputs
# Glass Top Plate w/Illuminated Wattmeters
# Dimensions 311 mm x 467 mm x 76 mm
# Weight 9.3 Kg

The MCC406M six channel power amplifier has 400 watts of combined power output with high current capability from six, five, four or three channels. It will drive any high quality loudspeaker system to its ultimate performance levels.

Six power amp channels, four each capable of 50 watts and two capable of 100 watts with less than 0.005% distortion assures that you will not be underpowered!

The fully discrete design features transient turn-on protection, multi-stage thermal protection, and regulated cooling fans. Of course, the legendary McIntosh fully complimentary double balanced configuration is also present.

The MCC406M provides flexible, powerful performance geared to the legendary standards of McIntosh. It is built to last, with the kind of sound quality long thought unattainable in a mobile environment. And, lest we forget – Oh Baby, those McIntosh looks. Unlike what they tell small children, this amp deserves to be seen as well as heard.

McIntosh MCC204

Prezzo: 2520 €

# 50 watts x 4, 20-20kHz, 4 ohms, 0.005%THD
# 100 watts x 4, 20-20kHz, 2 ohms, 0.01%THD
# S/N Ratio 105 dB
# One Band Equalizer
# High-Pass / Low-Pass Crossover Selectable
# MOSFET Pulse Width Modulated Power Supply
# Configurable to 4, 3, or 2 Channels
# Fully Discrete Design
# High Current Output (2 Ohm Stable)
# Dimensions 318 mm x 384 mm x 76 mm
# Weight 6.6 Kg

McIntosh’s MCC204 is a fully discrete high current amplifier with four separate power amplifier channels, each capable of 50 watts into 4 ohms with less than .005% distortion. Each pair of channels can be bridged to produce 200 watts in 4 ohms at .01% distortion. Peak outputs of 15 amperes provide ample power for a wide variety of high quality loudspeakers, including McIntosh’s own.

The design of the MCC204 is a fully complimentary double balanced configuration identical to that found in McIntosh’s advanced home audio amplifiers. The balanced inputs can be directly connected to the bridged speaker outputs of any head unit. Balanced inputs will cancel out the interference noise produced by other sources in a moving vehicle. There are 4 line level outputs to facilitate multi-amp system configurations. The subwoofer level can be set by an external rotary control that can be mounted in the vehicle. A line-level summed output is provided.

McIntosh Power Guard on all channels prevents the amp from being overdriven, while Sentry Monitor keeps an eye on the output stages for a long and productive operating life. There is also advanced speaker protection and built-in Thermal protection with a cooling fan controlled by sensors mounted inside the extruded aluminum cooling tunnel.

Take advantage of the traditional McIntosh standards of excellent for reproduction that is sonically transparent and musically accurate.

McIntosh MCC404M

Prezzo: 3600 €

# 100 watts x 4, 20-20kHz, 4 ohms, 0.005%THD
# 200 watts x 4, 20-20kHz, 2 ohms, 0.007%THD
# S/N Ratio 105 dB
# One Band Equalizer
# High-Pass Filter
# Low-Pass Filter
# MOSFET Pulse Width Modulated Power Supply
# Configurable to 4, 3, or 2 Channels
# Fully Discrete Design
# High Current Output (2 Ohm Stable)
# Dimensions 311 mm x 76 mm x 467 mm
# Weight 9.2 Kg

One look at the MCC404M multi-channel power amplifier and you know it’s a McIntosh. There’s the traditional glass top panel and those famous big blue wattmeters but, like all Macintosh’s, the MCC404M is more than just a pretty face.

A sophisticated MOSFET Pulse Width Modulated regulated power supply is used to create 100 watts x 4, 20 – 20k, at 0.005% THD – all channels driven. Paired channels can be bridged to provide 400 watts x 2 at the same frequencies and distortion levels. Channel configuration is selectable between two, three, and four channel output. The high current output is stable even into 2 ohms. Power is rated using a 12-volt battery.

The fully discrete design features transient turn-on protection, multi-stage thermal protection, and temperature regulated cooling fans. The one-band adjustable equalizer has a variable center frequency of 40 to 2000 Hz, along with both High and Low Pass variable crossover filters. Of course, the legendary McIntosh fully complimentary double balanced configuration is also present.

A summed subwoofer output is derived from the inputs, which are balanced and noise canceling. The subwoofer level can be remotely controlled. Each input has its own level controls and there is an in/out pass through for use in multiple amplifier configurations.

The MCC404M provides flexible, powerful performance geared to the legendary standards of McIntosh. It is built to last, with the kind of sound quality long thought unattainable in a mobile environment. And, lest we forget – Oh Baby, those McIntosh looks. Unlike what they tell small children, this amp deserves to be seen as well as heard.

McIntosh MCC404

Prezzo: 3000 €

# 100 watts x 4, 20-20kHz, 4 ohms, 0.005%THD
# 200 watts x 4, 20-20kHz, 2 ohms, 0.007%THD
# S/N Ratio 105 dB
# One Band Equalizer
# High-Pass Filter
# Low-Pass Filter
# MOSFET Pulse Width Modulated Power Supply
# Configurable to 4, 3, or 2 Channels
# Fully Discrete Design
# High Current Output (2 Ohm Stable)
# Dimensions 311 mm x 76 mm x 467 mm
# Weight 9.2 Kg

The McIntosh MCC404 may not have those famous blue meters under it’s glass top plate, but it does have a potent 4-channel amplifier whose high quality construction and jaw dropping performance are pure McIntosh. Rated at 100 watt x 4, 20-20KHz, 0.005%THD, the MCC404 is powered by a highly regulated Pulse Width Modulated power supply. The amps are configurable as either a four, three, or two channel system. Bridging a pair of channel will provide an awesome 400 watts of power, also at 20-20KHz, 0.005%THD. Is your jaw feeling a little loose?

The fully discrete design has balanced noise canceling inputs and a pass through for use with additional amplifiers. What kind of system would need additional amplifiers with this thing on-line? A built-in variable crossover lets you sort the music out to the various drivers, and selectable high and low pass filters keep the power focused in the appropriate operating ranges. A one-band equalizer with an adjustable center frequency helps to further tune your system.

Both the patented Power Guard technology and McIntosh’s Sentry Monitor are used to keep the amps up and running. Power Guard protects against accidentally overdriving the amp, creating speaker and ear damaging clipping. Sentry Monitor safeguards the precious output devices. Advance multi-stage Thermal protection is also provided. Temperature regulated cooling fans use sensors mounted in the extruded aluminum cooling tunnel to keep everything at safe operating temperature. Most of the time the fans are off, but they fire up quickly if needed.

The MCC404 is what McIntosh Mobile products are all about. The construction values are top drawer, with a clean, understated look that reeks of class. The performance is inspiring – smooth clean, limitless power that captures the detail as well as the drive of a musical performance. Flexible in application, with sophisticated power and protection technology, the MCC404 is a solid choice as the backbone of a serious high-end mobile audio system.

McIntosh MCC302

Prezzo: 2280 €

# 150 watts x 2, 4 ohms, 0.005%THD
# 300 watts x 2, 2 ohms, 0.008%THD
# Bridgeable to 600 Watts
# S/N Ratio 105 dB
# One Band Equalizer
# High-Pass / Low-Pass Selectable
# High Current Output – 30 Amperes
# Fully Complimentary Double Balanced Design
# Balanced Inputs w/Pass Through
# Equalizer (1-Band) and Variable Crossover Filters
# Gold Plated Terminals
# Dimensions 318 mm x 348 mm x 76 mm
# Weight 6.6 Kg

The immensely powerful McIntosh MCC302 is a stereo power amplifier with independent channels, each rated at 150 watts into 4 ohms with 0.005% THD. The fully complimentary double balanced design is identical to the design on McIntosh’s famous home audio amplifiers and can be bridged to provide 600 watts of power at 0.008%THD. Peak outputs of up to 30 amperes are available to control even the most difficult load.

Balanced inputs cancel out the interference noise produced by other sources in a moving vehicle. For use with conventional designs, the balanced inputs can be directly connected to the bridged speaker outputs of any head unit. There are 2 line level outputs to facilitate multi-amp system configurations.

A one-band equalizer with a variable center frequency is available. Boost or cut is up to 12 dB. There are also 12 db/octave Variable frequency high pass filters as well as 12 db/octave Variable frequency low pass filters. The subwoofer output can be controlled by a rotary control that can be mounted in the cabin near the drivers or passenger. Inputs to both channels are summed for a line level output.

McIntosh Power Guard keeps the amps from being overdriven, while Sentry Monitor protects the output stages of all channels. Any DC will activate your speaker protections and there is a multi-speed cooling fan as part of the sophisticated thermal protection circuits that ensure the normal long life expectancy of this McIntosh power amplifier.

McIntosh MCC602TM

Prezzo: 5820 €

# 300 watts x 2 (2, 4, or 8 ohms), 20-20kHz, 0.005%THD
# Mono: 600 Watts (1/2/4 ohms), 20-20kHz, 0.005%THD
# S/N Ratio 114 dB “A” Weighted
# Dual Pulse Width Modulated Power Supplies
# Balanced Push-Pull Design
# High Current Output (1 Ohm Stable)
# Balanced Noise Canceling Inputs
# Glass Top Plate w/Illuminated Wattmeters that measure both the current and voltage, and Visible Autoformers
# Dimensions 683 mm x 317.5 mm x 106.4 mm
# Weight 22.9 Kg

You know the electronics business has come a long way when you encounter a product like the McIntosh MCC602TM. Back in the Golden Days of home audio you might run into a massive stereo amplifier, built like a tank, gorgeous glass face plate with huge glowing blue meters, fully discrete, fully balanced, a classic push-pull capable of 300 watts per channel across 20 Hz to 20,000 Hz with virtually no distortion (0.005%THD). But in car stereo?

It’s a fact. The MCC602TM is just such a beast. Dual MOSFET PWM Regulated power supplies can pull that power from a battery rated at just 12-volts without shutting down everything else in your car or requiring a second deep cycle battery or alternator. You can even bridge this monster to produce 600 watts at the same bandwidth and distortion levels. With this kind of power you probably don’t even need speakers. Just tape the speaker leads to your car door and the amp can shake the whole car. Current output is equally awesome and the system is stable even into 1 ohm.

Balanced noise-canceling inputs are used to eliminate distortion caused by other sources in the car. McIntosh technology allows you to hook these inputs up even if your head unit lacks balanced outputs – these balanced inputs can be directly connected to the bridged speaker outputs of any head unit. An In/Out Pass Through provides easy hookup for multi amp systems. Each input has an individual level control and the inputs are summed for use on the subwoofer output. You can control the sub output through a remote sub level control – a nice feature.

With all this power, you can’t neglect protection – nobody likes car fires or smoked speakers. Here again McIntosh technology comes into play. Power Guard keeps you from over driving the amps. Actually, your ears will probably do this long before the Power Guard does but it’s there as a back up. Sentry Monitor watches the power output stages on all channels. In the unlikely event that power surges dangerous enough to threaten the massive high current output devices suddenly appear, Sentry Monitor will shut down the power supplies and save your amp. Of course, a current surge that massive probably means your car has been struck by lightning, so the amp might be the only thing not cooked. Multi-stage Thermal protection uses temperature monitors mounted in the extruded aluminum cooling tunnel to control a variable-speed cooling fan. Although normally off, this fan will automatically turn on and will increase its speed as additional cooling is needed.

On the short list of Amps-O-The Gods, the mighty McIntosh MCC602TM is a prominent resident. Incredible build, sophisticated power supplies, huge power and current output, attention to detail in both construction and performance, and – superficial though it is – those incredible glowing blue meters and visible Autoformers gleaming through that famous glass top panel – the MCC602TM is the stuff car audio dreams are made of.

McIntosh MCC301M

Prezzo: 2520 €

# 300 watts x 1, 4 ohms
# 600 watts x 1, 2 ohms
# 0.005% THD
# Frequency Response +0/-0.25dB 20Hz – 20KHz, +0/-3dB 10Hz – 100Khz
# S/N Ratio 105 dB “A” Weighted
# Fully Discrete Design
# Less than 0.005% THD
# One Band Equalizer
# Subsonic Filter
# Low-Pass Filter
# Pulse Width Modulated Power Supply
# Balanced Noise Canceling Inputs
# Glass Top Plate w/Illuminated Wattmeter
# Dimensions 318 mm x 348 mm x 76 mm
# Weight 6.7 Kg

The MCC301M Mono Amplifier, a unique Double Balanced design takes a carefully tuned amplifier with complimentary balanced circuitry, and operates it in a push-pull configuration with its output, successfully canceling virtually all distortion. Typical mid-frequency distortion readings into 4-ohms are a ridiculous 0.0005 percent. Against this spotless background any input noise would be a problem, so noise-canceling balanced inputs are provided.

To handle the wind and road noise, the MCC301M uses a temperature sensing high current power supply to serve up 600 watts into 2 ohms (12VDC) current 50 amperes. That’s close to arc welding levels – serious current.

An extra RCA output on the amp simplifies linking a multi-amp configuration and an input level control provides variable sensitivities from 500mV to 8VRMS, making it easy to match any head or control center. To prevent clipping, McIntosh’s exclusive Power Guard circuits monitor the output and there is speaker protection against DC voltage. Installer features include an internal one-band EQ with a variable frequency of 40Hz to 2kHz, a fixed Q of 2, and a variable level of +/- 12 dB; a built-in low pass crossover system with a 24dB slope and a variable frequency of between 40 and 120Hz, and a selectable subsonic filter (20 or 28Hz, 18dB/octave). True to its McIntosh origin, the MCC301M creates magical sound with near limitless power from a package whose styling is classic and timeless – the soft blue glow of a peak responding meter against shiny black glass.

Strumentazioni di Controllo da Plancia

Prezzo: 840 €
McIntosh MPM4000
Modulo V-Meter da plancia 1 din
Illuminazione Blu
Scala 200 W
Peso 0.54 Kg

 

McIntosh MDA5000

Prezzo: 2040 €

Convertitore Digitale/Analogico HD/CD 24 bit con oversampling ottuplo, livello di uscita 3.2 Vrms CD e 6.4 Vrms HD/CD.

If you a building a superior mobile audio system the way you build a superior home audio system – one piece at a time, your digital processor will be one of you most critical decisions. The McIntosh MDA5000 can provide performance that is sonically transparent and absolutely accurate – in a word, everything you want an external D/A to give you.

The converters themselves are Selected Grade 24-bit processors – one per channel. They work with a powerful 24-bit DSP that provides both 8-times Oversampling digital filter performance as well as automatic HDCD decoding for superior dynamic range on HDCD software. The incoming data is processed by a low jitter clock recovery digital interface. This eliminates small timing errors that smear the sound and mask subtle details.

Two coaxial digital inputs and one optical digital input are available. The inputs are constantly monitored and switching is automatic. All inputs and outputs are gold-plated for corrosion resistance and better signal transfer. The unit is mounted in an extruded aluminum chassis for improved performance and reliability and features the familiar Illuminated Glass Panel that is part of the McIntosh heritage.

A modern audio system, whether in the home or in the car, depends on the performance of its digital section for much of its sound quality. The MDA5000 has HDCD decoding, advanced Selected Grade 24-bit processors, auto-switching optical and coaxial inputs, McIntosh built-quality, and those Scottish good looks. Who says beauty’s only skin deep?

HDCD® Decoder with 24 Bit 8 Times Over-Sampling Digital Filter
The MDA5000 is equipped with a powerful 24 Bit digital signal processor. This digital signal processor can provide automatic HDCD decoding and 8 times over sampling digital filter function for both CD and HDCD. The HDCD decoder provides a wider dynamic range when the HDCD disc is used.

HDCD® Indicator
The MDA5000 is equipped with a HDCD Indicator. The indicator will be lit when the HDCD Digital Audio Signal is present at input

Selected Grade 24 Bit Digital-to-Analog Converter
The MDA5000 is equipped with a selected grade 24 Bit Digital-to-Analog Converter per channel. This advanced Digital-to-Analog Converter can provide low-distortion, low-noise and high fidelity sound.

Digital Interface Receiver
The MDA5000 is equipped with a low jitter clock recovery digital interface receiver. A very clean recovered clock from the incoming signal is used in the converter to maintain the sound quality.

Two Coaxial and One Optical Digital Audio Input with Automatic Switching
The MDA5000 has two coaxial and an optical digital audio input. All inputs are monitored continuously and switched automatically.

Gold Plated Terminals
McIntosh provides gold plated input and output terminals on the MDA5000 for superior corrosion resistance.

Superior Construction
The famous McIntosh Design, an Illuminated Glass Top panel together with a Extruded Aluminum Chassis help to insure superior performance and long term reliability which is very important in the automotive environment.

Analog Audio Specifications

Output Voltage
3.2 (±0.1)Volts RMS (CD Mode)
6.4 (±0.2) Volts RMS (HDCD Mode)

Total Harmonic Distortion
0.005% (1,000Hz)

Dynamic Range
Better than 98dB (1,000Hz)

Frequency Response
+0, -0.5dB from 20Hz to 20,000Hz

A-Weighted Signal To Noise Ratio
Better than 110dB

Channel Separation
Better than 105dB (1,000Hz)

Output Impedance
600 ohms

Digital Audio Specifications

Digital to Analog Conversion
24 bit

Digital Filter
8 Times Over Sampling

Sampling Frequency
44,100Hz

Analog Filter
2nd Order Butterworth Filter

Digital Inputs (Digital Audio Interface Format)
Coaxial 0.25V p-p/75 ohm (Inputs 1 and 2)
Optical (Input 3)

General Specifications

Power Requirements
14 Volts DC (10.8V to 15.6V allowable), 0.65 Amps

Overall Dimensions
10-11/16 inches (27.15cm) wide, 3.0 inches
(7.6cm) high, 12-1/2 inches (31.75cm) depth

Weight
9.3 pounds (4.2Kg) net, 12.4 pounds (5.6Kg) in shipping carton

McIntosh MX5000

Prezzo: 2700 €

Versione Hi-End del modello McIntosh MX406. Componenti ultra selezionati, chassis in rame, ingresso/uscita digitale coassiale configurabile.

- Sinto CD Pre HD/CD AM/FM
- Controlli analogici
- Alimentazione separata
- Ingresso AUX
- 2 Uscite di linea a 3V (4 canali)
- Connessione digitale coassiale IN/OUT configurabile
- Doppio convertitore D/A 20 bit 44,1 KHZ
- Separazione canali 98 dB
- Rapporto S/N 110 dB
- Risposta in frequenza: 20-20KHz +/- 0.5 dB
- Gamma dinamica: 100 dB
- THD 0.004%
- Peso 2.3 Kg

McIntosh MX406

Prezzo: 2340 €

- Sinto CD Pre HD/CD AM/FM
- Controlli analogici
- Alimentazione separata
- Ingresso AUX
- 2 Uscite di linea a 3V (4 canali)
- Connessione digitale coassiale dedicata per caricatore CD
- Doppio convertitore D/A 20 bit 44,1 KHZ
- Separazione canali 98 dB
- Rapporto S/N 110 dB
- Risposta in frequenza: 20-20KHz +/- 0.5 dB
- Gamma dinamica: 100 dB
- THD 0.004%
- Peso 2.3 Kg

Sporting the classic glass faceplate so familiar to McIntosh lovers, the MX406 brings a new standard of performance to the car audio arena. The MX406 is a reference control center, providing the traditional volume and balance functions, as well as full changer controls and a large Blue Fluorescent Information Panel. Mounted in a car’s dashboard, the MX406 brings the instant look of class, as well as familiar touches like the rotary volume control and analog bass and treble controls.

Behind the familiar faceplate lies something unfamiliar, a stand-alone Digital Converter, featuring Dual 20-bit D/As. A fiber-optic digital input feeds these marvelous converters the data as it streams from any connected McIntosh CD changer mechanisms. The fiber optic path is completely impervious to the magnetic fields and electrical currents that float around your car and its chassis. There’s also an auxiliary RCA analog input, for signal from more conventional sources.

Once the powerful D/A section has done its work, the newly converted output is sent to your amplifiers. The MX406 has 4 line-level outputs, each using a powerful 4-volt carrier to preserve the musical nuances and to provide superior resistance to RF interference and other environmental evils.

The McIntosh MX406 has it all.. The beautiful face provides a highly readable display with the convenience and familiarity of rotary controls. The on-board digital section has superior conversion, can be fed by an optical connection to a changer, and delivers its 4 outputs to the amps on a 4-volt carrier. Step up to McIntosh and let the MX406 class up your dash and class up your music.