Parasound Zbreeze

Cooling Fan

Prezzo: 320 €

Air Flow
25 CFM, fan speed low
50 CFM, fan speed medium
75 CFM, fan speed high

Acoustical Noise
20 dB, fan speed low
35 dB, fan speed medium
50 dB, fan speed high

Fans, per fan (three total)
92mm Diameter
Double Ball Bearings
Brushless DC Axial Motors

AC Power Requirement
110 – 120 V / 220 -240 V, 50 – 60 Hz
1.5 watts standby; 8 watts maximum fan speed

Dimensions
9.5″ Wide
10″ Deep with connectors
2″ High with feet, 1.75″ panel only
241 x 254 x 50mm, 44.1mm panel only

Net Weight
3.6 lbs / 1.7 Kg

• Three large fans, ball bearing construction for long life
• Two Turn Off Modes, instant turn off or 10 minute delayed turn off
• Three user-selectable fan speeds
• High air flow, greater than 90 cubic feet / minute at max speed
• Three auto turn on modes, 12 Volt DC trigger, 120V AC or front panel button
• Auto turn on mode disables front panel power button
• Extra-quiet design, less than 33 dB noise
• Switchable 115v / 230v operation
• 1U half-rack space chassis
• (W x D x H): 9 ½” x 9″ x 2 ¼” / 1 ¾” without feet
• (W X D x H): 242mm x 229mm x 57.5mm / 44.5mm w/o feet

Parasound Zhdmi

HDMI Selector

Prezzo: 950 €

AC Power Requirement
110 – 120 V / 220 -240 V, 50 – 60 Hz
5 watts

Dimensions
9.5″ Wide
10″ Deep with connectors
2″ High with feet, 1.75″ panel only
241 x 254 x 50mm, 44.1mm panel only

Net Weight
3.6 lbs / 1.7 Kg

Rack Mount Accessory
May be Purchased Separately
SBS: Bracket & bolts to attach any two Z Custom units side-by-side
in a standard 19″ equipment rack.
Zblank: 9.5″ x 1.75″ blank panel, required to mount a single Zhd unit;
Zblank kit includes one SBS

• HDMI 1.1, 1.2, 1.3 certified
• Fully HDCP compliant
• Five inputs, one output HDMI video and audio switcher
• Supports video resolutions up to 1080p and high resolution multi-channel digital audio
• Switchable HDMI booster for extra-long HDMI cable runs
• Links to Parasound 7.1 channel surround sound controllers (Halo C 1, C 2, NewClassic 7100) for seamless, automatic input switching
• IR remote control handset included; discrete IR codes
• HDMI output temporary ‘mute’ function
• Illuminated front panel indictors for input and boost
• RS-232C two-way communication with DB9 connector
• Unsolicited automatic RS-232 feedback for easy system integration
• External IR repeater input and loop out jacks
• Detachable IEC AC power cord
• Switchable 115v / 230v operation
• 1u half-rack space chassis
• (W x D x H): 9 ½” x 9″ x 2 ¼” / 1 ¾” without feet
• (W x D x H): 242mm x 229mm x 57.5mm / 44.5mm without feet

Parasound Ztuner v.2

Zone Tuner

Prezzo: 550 €

Tuning Range :
FM 87.5 MHz to 108 MHz
AM 520 kHz to 1610 kHz

FM Sensitivity :
Mono – IHF 10.8 dBf
Stereo – IHF 36.9 dBf for 50 dB of quieting

AM Sensitivity :
IHF 10 µV/m

S/N Ratio:
74 dB stereo
65 dB IHF weighted

FM Stereo separation :
50 dB @ 1 kHz
40 dB @ 10 kHz

Selectivity:
FM, 80 dB
AM, 30 dB

FM Frequency Response :
30 Hz – 15 kHz +/- 1 dB

AM Frequency Response:
20 Hz – 4.5 kHz +/- 2 dB

Total Harmonic Distortion :
FM Mono <0.08%
FM Stereo < 0.18%
AM < 0.5%

Capture Ratio:
1.5 dB

AM suppression:
60 dB

Dimensions:
9-1/2″ w x 1-3/4″ h x 10 ” d, 2 ” h without feet

Net weight: 4 lbs.

• Automatic, manual, and preset tuning
• Two-way RS-232 serial port connection
• Direct frequency access via remote and RS-232
• Thirty station presets, switchable to eight for quicker scrolling
• Forced Mono operation for mono zones
• Remote handset assignable up to four different zones
• Automatic on/off by 9 – 12 V trigger, with looping output
• Fully remote controlled with discrete on/off commands
• Rear panel infrared remote input and looping output
• Gold-plated RCA output jacks
• Multi-region European operation
• Voltage switchable between 115v and 230v
• Unique half-rack width chassis; 1 rack space high
• Fastening hardware available for rack mounting

Parasound Zphono

Phono Preamplifier

Prezzo: 249 €

Gain at 1 kHz :
MM, 46dB; MC, 61 dB

Input Sensitivity at 1 kHz :
MM, 5 mV in for 1.1 V output
MC, .9 mV in for 1.1 V output

Input Impedance :
MM, 47 k Ω
MC, 100 Ω

Input overload:
MM, 200 mV; MC, 36 mV

RIAA accuracy:
0.25 dB, 20 Hz – 20 kHz

S/N ratio:
MM, 84 dB
MC, 58 dB

Power requirement:
115 V – 230 V, 60/50 Hz, 5 W

Dimensions:
9-1/2″ w x 1-3/4″ h x 10 ” d, 2 ” h with feet

Net weight: 4 lbs.

• Works with all line drive preamplifiers
•  RIAA curve accurate to 0.25 dB
•  Ultra-low distortion
•  Switchable gain for moving magnet or moving coil cartridges
•  Exclusive AC polarity switch to eliminate hum
•  Ultra high-speed, low-noise opamps
•  Audiophile grade resistors and capacitors
•  Gold-plated RCA input and output jacks
•  Unique half-rack width chassis; 1 rack space high
•  Fastening hardware available for rack mounting

Parasound Zpre2

Two Channel Zone Preamplifier

Prezzo: 499 €

Frequency Response:
10 Hz – 100 kHz, +0/-3 dB
10 Hz – 50 kHz, +0/-8 dB

Frequency Bandwidth – Composite Video:
10 MHz

Total Harmonic Distortion:
0.006%

S/N Ratio:
112 dB, input shorted, IHF A-weighted
92 dB, input shorted, unweighted

Input Impedance:
15 k Ω

Input Sensitivity :
150 mV for 1 V output
Maximum Output: 7.6 V

Crosstalk:
83 dB at 1 kHz
76 dB at 20 kHz

Tone Controls:
Bass +/- 8 dB at 100 Hz
Treble +/- 10 dB at 10 kHz

AC Power Requirement:
110 – 120 V / 220 -240 V, 50 – 60 Hz
2 watt standby; 20 watts when turned on

Dimensions
9.5″ Wide
10″ Deep with connectors
2″ High with feet, 1.75″ panel only
241 x 254 x 50mm, 44.1mm panel only

Net Weight
4.6 lbs / 2.1 Kg

Rack Mount Accessory
May be Purchased Separately
SBS: Bracket & bolts to attach any two Z Custom units side-by-side
in a standard 19″ equipment rack.
Zblank: 9.5″ x 1.75″ blank panel, required to mount a single Zhd unit;
Zblank kit includes one SBS

• Two way RS-232 serial connection
• Four line-level audio and four composite video inputs
• Input 1 auto select priority function, defeatable
• External IR repeater Input jack
• Remote control includes discrete codes for Off and On
• Switchable auto or manual turn on/off
• 12 V trigger automatic turn/off, defeats Power button
• 12V output to trigger other components
• Record outputs for video and fixed level audio
• eadphone jack, automatically mutes line out
• Gold-plated RCA jacks
• Analog motor-driven volume control
• Outstanding design, parts quality and specs
• Voltage switchable between 115v and 230v
• Unique half-rack width chassis; 1 rack space high
• Fastening hardware available for rack mounting

Parasound Zamp v.3

Two Channel Zone Amplifier

Prezzo: 499 €

Continuous power output:
45 watts RMS x 2, 20 Hz – 20 kHz, 8 Ω, both channels driven
60 watts RMS x 2, 20 Hz – 20 kHz, 4 Ω, both channels driven
90 watts RMS x 1, 20 Hz – 20 kHz, 8 Ω, minimum impedence

Current capacity:
12 amperes peak per channel

Frequency response:
5 Hz – 100 kHz, +0/-3 dB

Total harmonic distortion:
< 0.07 % full power
< 0.02 % typical levels

IM distortion :
< 0.05 %

Dynamic headroom :
1.5 dB

Inter-channel crosstalk :
80 dB at 1 kHz; 60 dB at 20 kHz

Input Impedence :
33 k Ω

Input Sensitivity:
600 mV; 1.5 V for full output

S/N Ratio:
116 dB, input shorted, IHF A weighted

Dimensions:
9-1/2 w x 1-3/4 h x 10 d, 2 h with feet

Net weight: 7 lbs.

• 45 watts per channel into 8 Ω
• 60 watts per channel into 4 Ω
• 90 watts bridged into 8 Ω mono
• Fully discrete circuitry with Toroid power transformer
• Low heat design
• Headphone jack
• Indicators for AC present and channel operating status
• Automatic on/off by 9 – 12 V trigger
• Automatic on/off by audio signal with adjustable sensitivity
• Level controls for each channel; ground lift switch
• Gold-plated RCA input jacks and looping line output jacks
• 5-way speaker terminals
• Unique half-rack width chassis; 1 rack space high
• Fastening hardware available for rack mounting

Parasound 2100

Two Channel Preamplifier

Prezzo: 799 €

 

• Audio Specifications
  • Frequency Response
    10 Hz – 100 kHz, +/- 3 dB
  • THD Distortion
    < 0.008% at 20 Hz
  • S/N Ratio
    > 105 dB, input shorted, IHF A-weighted
    > 95 dB, input shorted, unweighted
  • Crosstalk
    > 75 dB at 20 kHz
  • Input Impedance
    30 k Ω
  • Output Impedance
    < 60 Ω
  • Input Sensitivity
    250 mV for 1 V output
    Total Gain: 12 db
    Maximum Output: 6.5 V
  • AC Power Requirement
    110-250 V, 50 – 60 Hz
    Voltage is automatically selected
    5 watts standby; 10 watts when turned on
• General Information
  • Dimensions
    Width: 17.25″ (437 mm)
    Depth: 14.5″ (369 mm)
    Height, with feet: 4.25″ (108 mm)
    Height, without feet: 3.5″ (89 mm)
    Weight: Net: 13 lbs. (5.9 kg)
    Shipping: 20 lbs. (9.1 kg)
  • Rack Mount Accessory
    RMK22 (May be purchased separately)

- Two channel high end audio preamplifier
- Front panel jack for portable MP3 player with 12dB auto gain offset to match levels of other sources
- 7 pairs of line level inputs
- 1 input pair can be switched for MM or MC phono cartridge with correct input impedance
- Can add to an existing surround system to upgrade analog 2 channel sound
• Connect your 2 channel analog sources to the Model 2100 instead of to your surround receiver
• Connects to surround receiver’s L, R, Sub line out jacks & to power amp’s input jacks
• Blends seamlessly into surround system, automatic pass-through when turned off
• Bypass input can be selected by remote
• Creates a mono sub channel output for 2 channel analog sources
• Analog bass management, low pass filter, adjustable 20 Hz – 140 Hz
• Separate output jacks for full range (large speakers), 80 Hz high pass filtered (small speakers)
- 2-way RS-232 serial port connection
- External IR repeater input & loop out jacks
- Remote control includes discrete codes for Off and On
- 2 auto turn on modes: AC power, 12v trigger
- Selecting automatic turn/off defeats the front panel Power button
- 12V trigger input jack and output jacks, 6’ (2m) trigger wire included
- Fixed level audio record output
- Headphone jack with auto mute for line out jacks
- Motor-driven analog volume control
- Balance control, bass & treble controls with defeat button
- Remote handset includes tone on/off button
- High current power supply
- Accepts both 115v & 230v AC, detachable IEC AC cord
- 2u chassis, rack mountable with RMK22 (sold separately)

Parasound 275

Two Channel Power Amplifier

Prezzo: 799 €

• Continuous RMS Power Output
  20 Hz – 20 kHz, Both Channels Driven
  75 watts x 2, 8 Ω
  120 watts x 2, 4 Ω
  120 watts x 2, 2 Ω
• Continuous RMS Power Output
  20 Hz – 20 kHz, Bridged Mono
  200 watts, 8 Ω
  200 watts, 4 Ω
• Current Capacity
  20 amps peak per channel
• Frequency Response
  20 Hz – 50 kHz, +0/-3 dB, 1 watt
• Dynamic Headroom
  1.3 dB
• Total Harmonic Distortion
  0.035% at full rated output
  0.025% at average listening levels
• IM Distortion
  0.05 %
• Transient IM Distortion
  Not measurable
• S/N Ratio
  110 dB at rated output, IHF A-weighted
  103 dB at rated output, unweighted
  93 dB at 2.828 V output, IHF A-weighted
  84 dB at 2.828 V output, unweighted
• Input Impedance
  33 k Ω
• Input Sensitivity
  800 mV for full rated output
• Inter-Channel Crosstalk
  80 dB, 1 kHz
  72 dB, 10 kHz
  65 dB, 20 kHz
• Damping Factor
  Over 150 at 20 Hz
• Auto Turn On – DC
  9 – 12V, 15 mA
• Auto Turn On – Audio
  1.2 mV – 12 V, adjustable
  15 minute turn off delay
• AC Power Requirement
  110 – 120 V / 220 -240 V, 50 – 60 Hz
  3 watts standby; 350 watts full output
• Dimensions
  17-1/4″ Wide
  16″ Deep, with connectors
  2-1/2″ High with feet, 1-3/4″ panel only
  437 x 406 x 63mm, 44.1 mm panel only
• Net Weight
  21 lbs , 9.6 kg
• Rack Mount Accessory
  May be Purchased Separately
  RMK11

• THX Ultra2 certified
• 75 watts rms per channel into 8 Ω, all channels driven
• 125 watts rms per channel into 4 Ω, all channels driven
• 125 watts rms per channel into 2 Ω, all channels driven
• 200 watts rms bridged into 8 Ω or 4Ω mono
• 30 amps peak current per channel
• Impedance selector switch for 2 Ω operation
• Bridging switch for stereo or mono operation
• A/B speaker terminals with individual on/off
• 18dB/octave high pass filter, switchable 20Hz or 40Hz
• Fully discrete circuitry with toroid transformers
• Efficient, low heat design
• DC Servo and relay protection circuits
• Automatic on/off by DC trigger with looping output
• Automatic on/off by audio signal with adjustable sensitivity
• Gold-plated RCA input jacks, loop output jacks
• Heavy duty 24k gold-plated 5-way speaker terminals
• Rear-mounted gain controls; ground lift switch
• 115/230v selector on rear panel
• Standby, channel status, high temperature indicators
• 1u chassis; RMK11 rack mount kit available
• (W x D x H): 17.25” x 16” x 2.5 ” / 1.75” without feet

Parasound 2125

Two Channel Power Amplifier

Prezzo: 1190 €

• Continuous RMS Power Output
  20 Hz – 20 kHz, Both Channels Driven
  125 watts x 2, 8 Ω
  200 watts x 2, 4 Ω
  200 watts x 2, 2 Ω
• Continuous RMS Power Output
  20 Hz – 20 kHz, Bridged Mono
  400 watts, 8 Ω
  400 watts, 4 Ω
• Current Capacity
  35 amps peak per channel
• Frequency Response
  20 Hz – 50 kHz, +0/-3 dB, 1 watt
• Dynamic Headroom
  1.3 dB
• Total Harmonic Distortion
  0.025% at full rated output
  0.015% at average listening levels
• IM Distortion
  0.05 %
• Transient IM Distortion
  Not measurable
• S/N Ratio
  114 dB at rated output, IHF A-weighted
  106 dB at rated output, unweighted
  93 dB at 2.828 V output, IHF A-weighted
  84 dB at 2.828 V output, unweighted
• Input Impedance
  33 k Ω
• Input Sensitivity
  1 V in for 28.28 V out, THX standard
• Inter-Channel Crosstalk
  85 dB, 1 kHz
  73 dB, 10 kHz
  67 dB, 20 kHz
• Damping Factor
  Over 150 at 20 Hz
• Auto Turn On – DC
  9 – 12V, 15 mA
• Auto Turn On – Audio
  1.2 mV – 12 mV, adjustable
  15 minute turn off delay
• AC Power Requirement
  110 – 120 V / 220 -240 V, 50 – 60 Hz
  3 watts standby; 550 watts full output
• Dimensions
  17-1/4″ Wide
  16″ Deep with connectors
  4-1/4″ High with feet, 3-1/2″ panel only
  437 x 406 x 107mm, 88.2mm panel only
• Net Weight
  27 lbs , 12.3 kg
• Rack Mount Accessory
  May be Purchased Separately
  RMK22

• THX Ultra2 certified
• 125 watts rms per channel into 8Ω, all channels driven
• 200 watts rms per channel into 4Ω, all channels driven
• 200 watts rms per channel into 2Ω, all channels driven
• 400 watts rms bridged into 8 Ω or 4Ω mono
• 35 amps peak current per channel
• Impedance selector switch for 2Ω operation
• Bridging switch for stereo or mono operation
• A/B speaker terminals with individual on/off
• 18dB/octave high pass filter, switchable 20Hz or 40Hz
• Fully discrete circuitry with toroid transformers
• Efficient, low heat design
• DC Servo and relay protection circuits
• Automatic on/off by DC trigger with looping output
• Automatic on/off by audio signal with adjustable sensitivity
• Gold-plated RCA input jacks, loop output jacks
• Heavy duty 24k gold-plated 5-way speaker terminals
• Rear-mounted gain controls; ground lift switch
• 115/230v selector on rear panel
• Standby, channel status, high temperature indicators
• 2u chassis; RMK22 rack mount kit available
• (W x D x H): 17.25” x 16” x 4.25 ” / 3.5” without feet

Parasound 2250

Two Channel Power Amplifier

Prezzo: 1990 €

• Continuous RMS Power Output
  20 Hz – 20 kHz, Both Channels Driven
  250 watts x 2, 8 Ω
  385 watts x 2, 4 Ω
  250 watts x 2, 2 Ω
• Continuous RMS Power Output
  20 Hz – 20 kHz, Bridged Mono
  600 watts, 8 Ω
  600 watts, 4 Ω
• Current Capacity
  45 amps peak per channel
• Frequency Response
  20 Hz – 50 kHz, +0/-3 dB, 1 watt
• Dynamic Headroom
  1.6 dB
• Total Harmonic Distortion
  0.02% at full rated output
  0.015% at average listening levels
• IM Distortion
  0.05 %
• Transient IM Distortion
  Not measurable
• S/N Ratio
  114 dB at rated output, IHF A-weighted
  106 dB at rated output, unweighted
  93 dB at 2.828 V output, IHF A-weighted
  84 dB at 2.828 V output, unweighted
• Input Impedance
  33 k Ω
• Input Sensitivity
  1 V for 28.28 V out, THX standard
• Inter-Channel Crosstalk
  85 dB, 1 kHz
  73 dB, 10 kHz
  67 dB, 20 kHz
• Damping Factor
  Over 150 at 20 Hz
• Auto Turn On – DC
  9 – 12V, 15 mA
• Auto Turn On – Audio
  1.2 mV – 12 V, adjustable
  15 minute turn off delay
• AC Power Requirement
  110 – 120 V / 220 -240 V, 50 – 60 Hz
  3 watts standby; 1000 watts full output
• Dimensions
  17-1/4″ Wide
  16″ Deep, with connectors
  2-1/2″ High with feet, 1-3/4″ panel only
  437 x 406 x 63mm, 44.1 mm panel only
• Rack Mount Accessory
  May be Purchased Separately
  RMK44

• THX Ultra2 certified
• 250 watts rms per channel into 8 Ω, all channels driven
• 400 watts rms per channel into 4 Ω, all channels driven
• 385 watts rms per channel into 2 Ω, all channels driven
• 700 watts rms bridged into 8 Ω or 4 Ω mono
• 45 amps peak current per channel
• Impedance selector switch for 2 Ω operation
• Bridging switch for stereo or mono operation
• A/B speaker terminals with individual on/off
• 18dB/octave high pass filter, switchable 20Hz or 40Hz
• Fully discrete circuitry with toroid transformers
• Efficient, low heat design
• DC Servo and relay protection circuits
• Automatic on/off by DC trigger with looping output
• Automatic on/off by audio signal with adjustable sensitivity
• Gold-plated RCA input jacks
• Heavy duty 24k gold-plated 5-way speaker terminals
• Rear-mounted gain controls; ground lift switch
• 115/230v selector on rear panel
• Standby, channel status, high temperature indicators
• 3u chassis with carry handles; RMK33 rack mount kit available
• (W x D x H): 17.25” x 18.5” x 6” / 5.25 ” without feet

Parasound 5125

Five Channel Power Amplifier

Prezzo: 2990 €

• Continuous RMS Power Output
  20 Hz – 20 kHz, Five Channels Driven
  125 watts x 5, 8 Ω
  185 watts x 5, 4 Ω
• Current Capacity
  35 amps peak per channel
• Frequency Response
  20 Hz – 50 kHz, +0/-3 dB, 1 watt
• Dynamic Headroom
  1.3 dB
• Total Harmonic Distortion
  0.025% at full rated output
  0.02% at average listening levels
• IM Distortion
  0.05 %
• Transient IM Distortion
  Not measurable
• S/N Ratio
  114 dB at rated output, IHF A-weighted
  106 dB at rated output, unweighted
  93 dB at 2.828 V output, IHF A-weighted
  84 dB at 2.828 V output, unweighted
• Input Impedance
  33 k Ω
• Input Sensitivity
  1 V in for 28.28 V out, THX standard
  1.6 V in for full rated output
• Inter-Channel Crosstalk
  85 dB, 1 kHz
  73 dB, 10 kHz
  67 dB, 20 kHz
• Damping Factor
  Over 150 at 20 Hz
• Auto Turn On – DC
  9 – 12V, 15 mA
• Auto Turn On – Audio
  1.2 mV – 12 V, adjustable
  15 minute turn off delay
• AC Power Requirement
  110 – 120 V / 220 -240 V, 50 – 60 Hz
  3 watts standby; 1600 watts full output
• Dimensions
  17-1/4″ Wide
  18-1/2″ Deep with connectors
  6″ High with feet, 5-1/4″ panel only
  437 x 470 x 150mm, 132mm panel only
• Net Weight
  48 lbs, 21.8 kg
• Rack Mount Accessory
  May be Purchased Separately
  RMK33.

• THX Ultra2 certified
• 125 watts rms per channel into 8Ω, all channels driven
• 185 watts rms per channel into 4Ω, all channels driven
• 35 amps peak current per channel
• Fully discrete circuitry with two toroid transformers
• Efficient, low heat design
• DC Servo and relay protection circuits
• Automatic on/off by DC trigger with looping output
• Automatic on/off by audio signal with adjustable sensitivity
• Gold-plated RCA input jacks
• Heavy duty 24k gold-plated 5-way speaker terminals
• Ground lift switch
• Standby, channel status, high temperature indicators
• 3u chassis with carry handles; RMK33 rack mount kit available
• (W x D x H): 17.25” x 18.5” x 6” / 5.25 ” without feet

Parasound 5250

Five Channel Power Amplifier

Prezzo: 3990 €

• Continuous RMS Power Output
  20 Hz – 20 kHz, Five Channels Driven
  250 watts x 5, 8 Ω
  385 watts x 5, 4 Ω
• Current Capacity
  45 amps peak per channel
• Frequency Response
  20 Hz – 50 kHz, +0/-3 dB, 1 watt
• Dynamic Headroom
  1.6 dB
• Total Harmonic Distortion
  0.025% at full rated output
  0.02% at average listening levels
• IM Distortion
  0.05 %
• Transient IM Distortion
  Not measurable
• S/N Ratio
  114 dB at rated output, IHF A-weighted
  106 dB at rated output, unweighted
  93 dB at 2.828 V output, IHF A-weighted
  84 dB at 2.828 V output, unweighted
• Input Impedance
  33 k Ω
• Input Sensitivity
  1 V in for 28.28 V out, THX standard
  1.6 V for full rated output
• Inter-Channel Crosstalk
  85 dB, 1 kHz
  73 dB, 10 kHz
  67 dB, 20 kHz
• Damping Factor
  Over 150 at 20 Hz
  Auto Turn On – DC
  9 – 12V, 15 mA
• Auto Turn On – Audio
  1.2 mV – 12 V, adjustable
  15 minute turn off delay
• AC Power Requirement
  110 – 120 V / 220 -240 V, 50 – 60 Hz
  3 watts standby; 2500 watts full output
• Dimensions
  17-1/4″ Wide
  18-1/2″ Deep with connectors
  7-5/8″ High with feet, 7″ panel only
  437 x 470 x 193mm, 176mm panel only
• Net Weight
  69 lbs., 31.4 kg
• Rack Mount Accessory
  May be Purchased Separately
  RMK44

• THX Ultra2 certified
• 250 watts rms per channel into 8Ω, all channels driven
• 385 watts rms per channel into 4Ω, all channels driven
• 45 amps peak current per channel
• Fully discrete circuitry with two toroid transformers
• Efficient, low heat design
• DC Servo and relay protection circuits
• Automatic on/off by DC trigger with looping output
• Automatic on/off by audio signal with adjustable sensitivity
• Gold-plated RCA input jacks
• Heavy duty 24k gold-plated 5-way speaker terminals
• Ground lift switch
• Standby, channel status, high temperature indicators
• 4u chassis with carry handles; RMK44 rack mount kit available
• (W x D x H): 17.25” x 18.5” x 7.63” / 7” without feet

Parasound D 200

Universal Disc Player

Prezzo: 1990 €

 

• Audio Specifications
  • Frequency Response
    Sampling Frequency 192 kHz, DVD-A: 4 Hz – 88 kHz
    Sampling Frequency 96 kHz, DVD: 4 Hz – 44 kHz
    Sampling Frequency 48 kHz, DVD: 4 Hz – 22 kHz
    Sampling Frequency 44.1 kHz, CD: 4 Hz – 20 kHz
    SACD: 2 Hz – 100 kHz
  • Dynamic Range
    DVD (48 kHz, 24 bit) 104 dB
    SACD 108 dB
    Audio CD 100 dB
  • Distortion and S/N
    Signal-to-Noise Ratio, IHF “A” weighted 100 dB
    Total harmonic distortion, 1 kHz 0.003 %
    Wow and flutter < 0.002 %
  • Output Levels
    Analog output level, 10 k Ω 2.0 V
    Coaxial, 75 Ω 0.5 Vp-p
    Optical, 660 nm -21dBm – -15dBm
  • Audio Digital-to-Analog Converters
    192 kHz / 24-Bit
• Video Specifications
  • General Video
    Video Compression
    MPEG 2
    Video Signal Format
    NTSC / PAL
    HDMI Spec
    1.1 with HDCP
  • Output Levels, 75 Ω
    Composite Video 1.0 Vp-p
    S-Video Y/C 1.0 / 0.286 Vp-p
    Component Video Y / Pb / Pr 1.0 / 0.7 / 0.7 Vp-p
  • Video Digital-to-Analog Converters
    216 MHz / 12-Bit
• General Information
  • Dimensions
    Front Panel Width: 17.25″ (437 mm)
    Front Panel Height: 5.25″ (133 mm)
    Height with feet: 5.875″ (150 mm)
    Depth: 15″ (381 mm)
  • Power Requirements
    100 V to 240 V AC, 50/60 Hz, 30 watts
  • Net Weight
    15.75 lb. (7.1 kg)
  • Shipping Weight
    23.75 lb. (10.7 kg)

• HDMI 1.1 digital output with simultaneous analog video output
• Fully HDCP-compliant (High-bandwidth Digital Content Protection)
• 5.1 multi-channel output is available at optical and digital audio jacks,
even if HDMI output is connected to a stereo HDMI TV
• 480p / 720p / 1080i selectable scan rate, with Faroudja DCDI
• Simultaneous progressive scan and composite video output
• DVD-A and multi-channel SACD, with bass management
• SACD goes directly to audio DACs as a DSD bit stream
• 192 kHz / 24-Bit audio DACs, 216 MHz / 12 bit precision video DAC
• One component video output
• Two s-video and two composite video outputs
• Coaxial and optical digital audio outputs
• Video and digital audio circuits can be turned off for purest analog audio
• RS-232C two-way communication port
• IR repeater input and loop out jacks
• Discrete IR codes for on & off
• 7.5 IRE / 0 IRE black level adjust for pure black with any TV
• DVDR/RW, CD-R/RW compatible; MP-3, JPEG,WMA, DivX and Kodak Picture CD playback
• Remote handset, primary buttons glow in the dark
• 3 rack space chassis, requires RMK33 rack mount kit
• W x D x H 17.25″ x 16″ x 5.875″ / 5.25″ without feet

Parasound 7100

Surround Controller

Prezzo: 4990 €

 

• Audio Performance
  • Frequency Response
    20 Hz – 20 kHz, +/- 0.1 dB
    20 Hz – 35 kHz, +/- 0.5 dB
  • Interchannel Crosstalk
    -105 dB
  • Total Harmonic Distortion
    Digital Inputs 0.005%
    Analog Inputs 0.005%
  • S/N Ratio, A-weighted
    Digital Inputs 105 dB
    Analog Inputs 100 dB
    7.1 channel Analog Input 103 dB
  • Maximum Analog Input Level
    2 Volts RMS
  • Input Impedance
    Coaxial Digital Inputs 75 Ω
    Analog Inputs 12k Ω
  • Maximum Analog Output Level
    Main Outputs 8 Volts RMS
    Record Output 1 Volt RMS
    Fixed Zone Output 1 Volt RMS
  • Output Impedance
    Analog Outputs 120 Ω
    Record Output 120 Ω
• Video Performance
  • Bandwidth
    Component Video 100 MHz, – 3 dB
    S-Video 8 MHz, – 3 dB
    Composite Video 8 MHz, – 3 dB
  • Signal-to-Noise Ratio
    Component Video 80 dB
    S-Video 70 dB
    Composite Video 70 dB
  • Input Impedance
    All Video Inputs 75 Ω
• Dimensions
  17-1/4″ Wide
  16″ Deep
  5-7/8″ High with feet, 5-1/4″ panel only (150 mm)
  437 x 406 x 150 mm, 133 mm panel only
• Power Requirements
  90 V to 260 V AC, 50-60 Hz, 65 watts
• Net Weight
  18 lb. (8.2 kg)
• Shipping Weight
  26 lb. (11.8 kg)

Inputs:
• Coaxial Digital Audio Inputs (assignable to Multiple Sources)
• Toslink Digital Audio Inputs (assignable to Multiple Sources)
• Specific Stereo Analog Audio Inputs
• Digital Audio and Video Inputs (inputs 7-10)
• 7.1 Channel Analog Inputs with analog bass management
• Component Video/High Definition (up to 1080i) Inputs, assignable to any source
• S-Video Inputs, assignable to any source
• Composite Video Inputs, assignable to any source
• Video Signals including OSD are up-converted to component
• Two-Way RS-232 port for home automation control
• Two External IR remote control repeater inputs
• Three 12V Triggers for external control; two are programmable

Outputs:
• 7.1 Main Analog output
• Main Component Video Outputs
• Main S-Video Output
• Main Composite Video Outputs
• Optical Digital Audio Output
• Fixed and Variable Audio Zone Outputs
• Composite Video Zone Output
• Audio Record Output

Dimensions
• 3u chassis; RMK33 rack mount kit available
• (W x D x H): 17.25” x 16” x 5.875” / 5.25” without feet

Function :
• 7.1 analog input includes bass management
• DSP engine with Motorola 56367-7 supports all major formats
• Full suite of THX Ultra2 processing modes and features
• Multiple Wolfson WM8770 codecs used for signal conversion
• Volume and level trim accomplished in the analog domain
• Patented analog / digital hybrid bass management system
• Enhanced Bass setting routes bass to sub with full range speakers
• Assignable customized Presets
• Presets contain bass & treble adjustments, center, surround & subwoofer trim, AV sync delay or “lipsync” adjustments
• Adjustable Bass, Treble and reverb for music surround modes
• Customizable input names
• 1/8″ (3.5mm) stereo headphone jack with auto downmixing

Model 7100 includes a powerful universal and learning remote control. Its buttons are back-lit so you actually see them in a darkened theater room. It controls the main and remote zones for the Model 7100 and up to six other components in your home theater system.

Parasound Halo T 3

FM/AM Tuner

Prezzo: 990 €

FM Sensitivity:
Mono – IHF 11 dBf Stereo- IHF 37.2 dBf for 50 dB of quieting

AM Sensitivity :
IHF 10 uV/m

Signal to noise ration :
FM > 74 dB stereo, AM > 45 dB

FM Stereo separation :
50 dB @ 1 kHz; 40 dB @ 10 kHz

Selectivity:
FM 80 dB; AM 30 dB

FM frequency response :
30 Hz – 15 kHz +/- 1 dB

AM frequency response:
20 Hz – 5.5 kHz +/- 2 dB

Total harmonic distortion:
FM Mono < 0.08%;
FM Stereo < 0.2%;
AM < 0.08%;

Capture ratio:
< 1.5 dB

AM Suppression:
60 dB

Voltage:
Switchable for 110V – 120V or 220V – 240V operation

Dimensions:
17-1/4″ w x 4-1/8″ h x 13-3/4 ” d, 3-5/8 ” h without feet

Net weight: 15 lb.

• 60 station presets with Auto-Memory feature
• Seek, manual, and preset tuning with RDS
• Direct frequency access via remote and RS-232
• Two-way RS-232 Serial Port connection
• Balanced XLR and unbalanced RCA outputs
• Enormous encapsulated toroid power transformer
• Vacuum fluorescent status display
• Dual layer glass epoxy circuit boards
• Multi-region USA-European operation
• External IR input and loop output jacks
• Two 12v triggers; 1 input and 1 loop output
• Gold-plated RCA jacks
• Fully remote controlled
• Remote control also operates P 3 Preamplifier
• Robust 2u Chassis, rack mounting adapter available

Parasound Halo P 3

Stereo Preamplifier

Prezzo: 1350 €

Frequency Response:
5 Hz – 55 kHz, +0/-1 dB, full output

Total harmonic distortion:
< 0.01% 1 kHz; < 0.03% 20 kHz

IM distortion: balanced 16 V rms
< 0.03 %

Maximum Output :
> 8 V before clipping

Input Impedence :
> line input 30 kW; phono 47 kW

Output Impedence :
60 Ω

Input Sensitivity:
line inputs 150 mV, +/- 5%; phono 2 mV

Maximum Input level:
10.5 V before clipping

S/N ratio:
line input >92 dB, A-weighted, ref 1 V output
line input >84 dB, unweighted, ref 1 V output

Cross-talk:
> 55 dB, 20 kHz

Channel level matching:
< 0.1 dB

Voltage:
Switchable for 110V – 120V or 220V – 240V operation

Dimensions:
17-1/4″ w x 4-1/8″ h x 13-3/4 ” d, 3-5/8 ” h without feet

Net weight: 16 lb.

• 6 line inputs, one input switchable to MM phono
• Relay switched direct inputs: balanced and unbalanced
• External processor send and receive loop
• Balanced XLR and unbalanced RCA outputs
• Vacuum fluorescent status display
• Defeatable bass and treble controls
• Enormous encapsulated toroid power transformer
• Dual layer glass epoxy circuit boards
• High resolution stereo headphone circuit
• RS-232 control port
• External IR input and loop output jacks
• Two 12v triggers; 1 input and 1 loop output
• Gold-plated RCA jacks
• Remote control also operates T 3 Tuner
• Robust 2u Chassis, rack mounting adapter available

Parasound Halo A 23

Two Channel Power Amplifier

Prezzo: 1450 €

Continuous power output:
125 watts RMS x 2, 20 Hz – 20 kHz, 8 Ω, both channels driven
225 watts RMS x 2, 20 Hz – 20 kHz, 4 Ω, both channels driven
400 watts RMS x 1, 20 Hz – 20 kHz, 8 Ω

Current capacity:
45 amperes peak per channel

Power bandwidth:
5 Hz – 100 kHz, +0/-3 dB at 1 watt

Total harmonic distortion:
< 0.06 % at full power

IM distortion: balanced 16 V rms
< 0.04 %

Slew rate:
> 130 V/µsecond

Dynamic headroom:
> 1.5 dB

Interchannel crosstalk:
> 80 dB at 1 kHz;
> 63 dB at 20 kHz

Input sensitivity:
1 V for 28.28 V, THX Reference Level

Input impedance:
33 k Ω

S/N ratio:
112 dB, input shorted, IHF A-weighted

Damping factor:
> 800 at 20 Hz

Voltage:
Switchable for 110V – 120V or 220V – 240V

Dimensions:
17-1/4″ w x 4-1/8″ h x 13-1/4″ d, 3-5/8 ” h without feet

Net weight: 28 lb.

• Circuitry designed by legendary John Curl
• Lucasfilm Home THX Ultra2 certified
• High bias Class A/AB operation
• Balanced inputs with discrete circuits and XLR connectors
• Direct Coupled – no capacitors or inductors in signal path
• Complementary MOSFET driver stage and JFET input stage
• 12 beta-matched 15 amp, 60 MHz bipolar output transistors
• 1 kVA encapsulated toroid power transformer with independent
  secondary windings for each channel
• 48,000 µF power supply filter capacitance
• DC Servo and relay protection circuits
• AC present, channel status, high temperature displays
• Heavy-duty 24k gold-plated 5-way speaker binding posts
• Gold-plated RCA input jacks; loop output jacks
• Auto turn-on by 12v trigger or audio signal
• Rear mounted gain controls, ground lift switch
• 2u Chassis, carry handles, rack mounting adapter included

Parasound Halo A 21

Two Channel Power Amplifier

Prezzo: 3450 €

Continuous power output:
250 watts RMS x 2, 20 Hz – 20 kHz, 8 Ω, all channels driven
400 watts RMS x 2, 20 Hz – 20 kHz, 4 Ω, all channels driven
750 watts RMS x 1, 20 Hz – 20 kHz, 8 Ω

Current capacity:
60 amperes peak per channel

Power bandwidth:
5 Hz – 100 kHz, +0/-3 dB at 1 watt

Total harmonic distortion:
< 0.2 % at full power

IM distortion: balanced 16 V rms
< 0.04 %

Slew rate:
> 130 V/µsecond

Dynamic headroom:
> 1.5 dB

Interchannel crosstalk:
> 80 dB at 1 kHz;
> 63 dB at 20 kHz

Input sensitivity:
1 V for 28.28 V, THX Reference Level

Input impedance:
33 k Ω unbalanced; 66 k Ω balanced

S/N ratio:
112 dB, input shorted, IHF A-weighted

Damping factor:
> 1100 at 20 Hz

Voltage:
110V – 120V

Dimensions:
17-1/4″ w x 7-5/8″ h x 19-1/8″ d, 7 ” h without feet

Net weight: 60 lb.

• Circuitry designed by legendary John Curl
• THX Ultra2 certified
• High bias Class A/AB operation
• Balanced inputs with discrete circuits and XLR connectors
• Direct Coupled – no capacitors or inductors in signal path
• Complementary MOSFET driver stage and JFET input stage
• 16 beta-matched 15 amp, 60 MHz bipolar output transistors
• 1.2 kVA encapsulated toroid power transformer with independent
  secondary windings for each channel
• 100,000 µF power supply filter capacitance
• DC Servo and relay protection circuits
• AC present, channel status, high temperature indicators
• Heavy-duty 24k gold-plated 5-way speaker terminals
• Gold-plated RCA input jacks; ground lift switch
• Auto turn-on by 12v trigger or audio signal, 12v trigger out
• 4u Chassis, carry handles, rack mounting adapter included

Parasound Halo A 52

Five Channel Power Amplifier

Prezzo: 3390 €

Continuous power output:
125 watts RMS x 5, 20 Hz – 20 kHz, 8 Ω, all channels driven
225 watts RMS x 5, 20 Hz – 20 kHz, 4 Ω, all channels driven

Current capacity:
30 amperes peak per channel

Power bandwidth:
5 Hz – 100 kHz, +0/-3 dB at 1 watt

Total harmonic distortion:
< 0.2 % at full power

IM distortion: balanced 16 V rms
< 0.04 %

Slew rate:
> 130 V/µsecond

Dynamic headroom:
> 1.5 dB

Interchannel crosstalk:
> 78 dB at 1 kHz;
> 63 dB at 20 kHz

Input sensitivity:
1 V for 28.28 V, THX Reference Level

Input impedance:
47 k Ω unbalanced; 94 k Ω balanced

S/N ratio:
113 dB, input shorted, IHF A-weighted

Damping factor:
> 1000 at 20 Hz

Voltage:
110V – 120V

Dimensions:
17-1/4″ w x 7-5/8″ h x 19-3/4 ” d, 5-1/4 ” h without feet

Net weight: 50 lb.

• Circuitry designed by legendary John Curl
• THX Ultra2 certified
• High bias Class A/AB operation
• Balanced inputs with discrete circuits and XLR connectors
• Direct Coupled – no capacitors or inductors in signal path
• Complementary MOSFET driver stage and JFET input stage
• 20 beta-matched 15 amp, 60 MHz bipolar output transistors
• 1.4 kVA encapsulated toroid power transformer with independent
  secondary windings for each channel
• 100,000 µF power supply filter capacitance
• DC Servo and relay protection circuits
• AC present, channel status, high temperature indicators
• Heavy-duty 24k gold-plated 5-way speaker terminals
• Gold-plated RCA input jacks; ground lift switch
• Auto turn-on by 12v trigger or audio signal, 12v trigger out
• 3u Chassis, carry handles, rack mounting adapter included

Parasound Halo A 51

Five Channel Power Amplifier

Prezzo: 6490 €

Continuous power output:
250 watts RMS x 5, 20 Hz – 20 kHz, 8 Ω, all channels driven
400 watts RMS x 5, 20 Hz – 20 kHz, 4 Ω, all channels driven

Current capacity:
60 amperes peak per channel

Power bandwidth:
5 Hz – 100 kHz, +0/-3 dB at 1 watt

Total harmonic distortion:
< 0.2 % at full power

IM distortion: balanced 16 V rms
< 0.04 %

Slew rate:
> 130 V/µsecond

Dynamic headroom:
> 1.5 dB

Interchannel crosstalk:
> 78 dB at 1 kHz;
> 63 dB at 20 kHz

Input sensitivity:
1 V for 28.28 V, THX Reference Lev

Input impedance:
47 k Ω unbalanced; 94 k Ω balanced

S/N ratio:
112 dB, input shorted, IHF A-weighted

Damping factor:
> 1100 at 20 Hz

Voltage:
110V – 120V

Dimensions:
17-1/4″ w x 7-5/8″ h x 20″ d, 7″ h without feet

Net weight: 80 lb.

• Circuitry designed by legendary John Curl
• THX Ultra2 certified
• High bias Class A/AB operation
• Balanced inputs with discrete circuits and XLR connectors
• Direct Coupled – no capacitors or inductors in signal path
• Complementary MOSFET driver stage and JFET input stage
• 40 beta-matched 15 amp, 60 MHz bipolar output transistors
• 2.2 kVA encapsulated toroid power transformer with independent
  secondary windings for each channel
• 164,000 µF power supply filter capacitance
• DC Servo and relay protection circuits
• AC present, channel status, high temperature indicators
• Heavy-duty 24k gold-plated 5-way speaker terminals
• Gold-plated RCA input jacks; ground lift switch
• Auto turn-on by 12v trigger or audio signal
• 4u Chassis, carry handles, rack mounting adapter included

Parasound Halo C 2

Surround Controller

Prezzo: 6490 €

Frequency response:
digital inputs 20 Hz – 42 kHz
analog inputs 20 Hz – 22 kHz
7.1 channel input 5 Hz – 200 kHz +0/-3 dB

Total harmonic distortion:
digital inputs <.002%
analog inputs <.002%
7.1 channel input <.002%

Signal to noise ratio:
digital inputs 102 dB
analog inputs 98 dB
7.1 channel input 107 dB

Maximum input levels:
balanced 35 V rms
unbalanced 3.6 V rms
7.1 channel input 8 V rms

Maximum output levels: balanced 16 V rms
7.1 channel outputs 8 V rms
programmable outputs 8 V rms

Video bandwidth:
composite and S-video (non OSD) 30 MHz
component video 300 MHz

Dimensions:
17-1/4″ w x 7-5/8″ h x 16″ d; 5-1/4 ” h without feet

Net weight: 18 lb.

• Dolby Digital EX, DTS ES, and Dolby Pro Logic II surround
• THX Ultra2 Certified with THX Surround EX
• 7.5 Channel Enhanced Surround; 7.1 with 4 programmable outputs
• Additional DSP modes include Surround Music and Party
• Patented hybrid bass management prevents time smearing
• Automatic digital audio and video input selection
• Nine balanced outputs, two balanced inputs with XLR connectors
• Four audio only inputs plus a tape monitor/external processor loop
• Eight digital inputs; two digital outputs
• 7.1 analog input with pure analog path, bypasses DSP
• Six audio/video inputs with composite and S-Video connectors
• 3 composite video and 3 S-Video outputs: OSD, no OSD, record
• 2 assignable component/RGB video inputs with separate H and V Sync
• 1 component/RGB video output with separate H and V Sync
• BNC to RCA adapters are included for component video jacks
• Component inputs/output pass 1080i and 720p signals flawlessly
• Digital inputs and surround modes are assignable to sources
• Presets for optimum analog input levels for various sources
• 100% automatic calibration of channel levels and delay times
• Calibration microphone with 25′ cable included
• Dual zone control with analog audio and composite video outputs
• External IR input jacks for main and second zone
• Three 12v triggers, two programmable for events; wires included
• Fully upgradeable and controllable via two-way RS-232 port
• 3u chassis, rack mountable
• Universal and learning remote included

Parasound Halo C 1

Surround Controller

Prezzo: 9990 €

Frequency response:
digital inputs 20 Hz – 42 kHz
analog inputs 20 Hz – 22 kHz
7.1 channel input 5 Hz – 200 kHz +0/-3 dB

Total harmonic distortion:
digital inputs <.002%
analog inputs <.002%
7.1 channel input <.002%

Signal to noise ratio:
digital inputs 102 dB
analog inputs 98 dB
7.1 channel input 107 dB

Maximum input levels:
balanced 35 V rms
unbalanced 3.6 V rms
7.1 channel input 8 V rms

Maximum output levels: balanced 16 V rms
7.1 channel outputs 8 V rms
programmable outputs 8 V rms

Video bandwidth:
composite and S-video (non OSD) 30 MHz
component video 300 MHz

Dimensions:
17-1/4″ w x 7-5/8″ h x 16″ d; 7″ h without feet

Net weight: 22 lb.

• Dolby Digital EX, DTS ES, and Dolby Pro Logic II surround
• THX Ultra2 Certified with THX Surround EX
• 7.5 Channel Enhanced Surround; 7.1 with 4 programmable outputs
• Additional DSP modes include Surround Music and Party
• Patented hybrid bass management prevents time smearing
• 5″ front panel TFT display of main or zone video and the setup menu
• Automatic digital audio and video input selection
• Nine balanced outputs, two balanced inputs with XLR connectors
• Four audio only inputs plus a tape monitor/external processor loop
• Eight digital inputs; two digital outputs
• 7.1 analog input with pure analog path, bypasses DSP
• Six audio/video inputs with composite and S-Video connectors
• 3 composite video and 3 S-Video outputs: OSD, no OSD, record
• 2 assignable component/RGB video inputs with separate H and V Sync
• 1 additional assignable component video input
• 1 component/RGB video output with separate H and V Sync
• BNC to RCA adapters are included for component video jacks
• Component inputs/output pass 1080i and 720p signals flawlessly
• Digital inputs and surround modes are assignable to sources
• Presets for optimum analog input levels for various sources
• 100% automatic calibration of channel levels and delay times
• Calibration microphone with 25′ cable included
• Dual zone control with analog audio and composite video outputs
• External IR input jacks for main and second zone
• Three 12v triggers, two programmable for events; wires included
• Fully upgradeable and controllable via two-way RS-232 port
• Unique inductive-capacitive LC power supply post-filtering
• 4u chassis, rack mountable
• Universal and learning remote included

• PLIIx-Lipsync Software Upgrade Features
• Dolby Pro Logic IIx Movie*
• Dolby Pro Logic IIx Music*
• THX Games Mode*
• Party Mode for 7.1 Channel*
• Lip Sync Adjustment
• Bass Management Improvements
• Bass and Treble Controls, Higher Resolution
• Bass and Treble Controls, Choice of Frequencies

Parasound Halo D 3

Universal Disc Player

Prezzo: 2990 €

Frequency Response:
Sampling Frequency 192 kHz, DVD-A 4 Hz – 88 kHz
Sampling Frequency 96 kHz, DVD 4 Hz – 44 kHz
Sampling Frequency 48 kHz, DVD 4 Hz – 22 kHz
Sampling Frequency 44.1 kHz, CD 4 Hz – 20 kHz
SACD 2 Hz – 100 kHz

Dynamic Range:
DVD (48 kHz, 24 bit) 104 dB
SACD 108 dB
Audio CD 100 dB

Distortion and S/N:
Signal-to-Noise Ratio, IHF “A” weighted 100 dB
Total harmonic distortion, 1 kHz 0.003 %
Wow and fl utter < 0.002 %

Output Levels:
Analog output level, 10 k Ω 2.0 V
Coaxial, 75 O 0.5 Vp-p
Optical, 660 nm -21dBm- -15dBm

Audio Digital-to-Analog Converters:
192 kHz / 24-Bit
Video Specifications

General Video:
Video Compression MPEG 2
Video Signal Format NTSC / PAL
HDMI Spec 1.1 with HDCP

Output Levels, 75 Ω:
Composite 1.0 Vp-p
S-Video: Y/C 1.0 / 0.286 Vp-p
Component: Y / Pb / Pr 1.0 / 0.7 / 0.7 Vp-p

Video Digital-to-Analog Converters:
216 MHz / 12-Bit
General Information

Dimensions:
Front Panel Width: 17 1/4″ (437 mm)
Front Panel Height: 5 1/4″ (133 mm)
Height with feet: 5 7/8″ (150 mm)
Depth: 15″ (381 mm)

Power Requirements:
100 V to 240 V AC, 50/60 Hz, 30 watts

Net Weight:
15 lb. (6.8 kg)

Shipping Weight:
23 lb. (10.4 kg)

• HDMI 1.1 digital output with simultaneous analog video output
• Fully HDCP-compliant (High-bandwidth Digital Content Protection)
• 5.1 multi-channel output is available at optical and digital audio jacks,
even if HDMI output is connected to a stereo HDMI TV
• 480p / 720p / 1080i selectable scan rate, with Faroudja DCDI
• Simultaneous progressive scan and composite video output
• DVD-A and multi-channel SACD, with bass management
• SACD goes directly to audio DACs as a DSD bit stream
• 192 kHz / 24-Bit audio DACs, 216 MHz / 12 bit precision video DAC
• BNC and RCA jacks for component video outputs
• Two s-video and two composite video outputs
• Coaxial and optical digital audio outputs
• Balanced two channel analog output with XLR jacks
• Video and digital audio circuits can be turned off for purest analog audio
• RS-232C two-way communication port
• IR repeater input and loop out jacks
• Discrete IR codes for on & off
• 7.5 IRE / 0 IRE black level adjust for pure black with any TV
• DVDR/RW, CD-R/RW compatible; MP-3, JPEG,WMA, DivX and Kodak Picture CD playback
• Remote handset, primary buttons glow in the dark
• 3 rack space chassis, requires RMK33 rack mount kit
• W x D x H 17.25″ x 16″ x 5.875″ / 5.25″ without feet

Parasound Halo JC 2

Two Channel Preamplifier

Prezzo: 5490 €

Frequency Response
5 Hz – 100 kHz, +0/-3 dB

Distortion
THD: < 0.003% at 100 Hz
THD: < 0.005% at 20 kHz
IM: < 0.003%

S/N Ratio
> 116 dB, input shorted, IHF A-weighted
> 104 dB, input shorted, unweighted

Crosstalk
> 100 dB at 10 kHz
> 90 dB at 20 kHz

Gain
14 dB, maximum

L, R Gain Control Range
- 10 dB

Input Impedance
Unbalanced: 30k ohms
Balanced: 30k ohms per leg

Output Impedance
Unbalanced: < 60 ohms
Balanced: < 60 ohms per leg

Input Sensitivity
200 mV for 1 V output
Total Gain: 14 dB
Maximum Output: 8 V

XLR Pin Identification
1 = Ground (Shield)
2 = Positive
3 = Negative (Return)

AC Power Requirement
110 – 120 V or 220-240 V, 50 – 60 Hzs
(Set AC Voltage switch on rear panel)
25 watt standby; 30 watts when turned on

Dimensions
Width: 17 1/4″ (437 mm)
Depth: 16″ (406 mm)
Height, with feet: 5 7/8″ (150 mm)
Height, without feet: 5 1/4″ (133 mm)

Weight
Net: 24 lbs. (11 kg)
Shipping: 36 lbs. (16.4 kg)

Rack Mount Accessory
HRA 3 (May be purchased separately)

• 6 pairs unbalanced RCA line-level audio input jacks
• 2 input pairs can be switched to XLR balanced connectors
• Independent balanced/unbalanced select for the L & R channel
• Each channel’s input is switched by its own gold-on-silver contact relay
• 4 output jack pairs with specialized functions:
• 1 Main output jack pair is balanced XLR, polarity is switched by remote
• 1 Main output jack pair is unbalanced RCA, polarity is switched by remote
• 1 output jack pair is unbalanced RCA, inverted polarity only
• 1 output pair is unbalanced RCA, normal polarity, fixed level for recorders
• Dual-mono left & right channel circuit boards minimize crosstalk
• Hand-matched complementary FETs
• Direct DC servo-coupled, no capacitors in the signal path
• Premium 4-gang motor-driven analog master volume control
• Separate TKD brand analog gain controls for L & R channel
• 3/8″ thick aluminum shielding around audio boards
• Shielding prevents noise from power supplies & control circuits
• Separate output jacks for simultaneous normal & non-inverting polarity
• Aluminum chassis rear panel
• Remote control polarity switching uses gold-on-silver contact relays
• Vampire brand 24k gold-plated RCA jacks
• Neutrik brand premium XLR connectors
• Canare brand internal wiring
• High capacity R-core audio power transformer & inductor
• Hyper-fast soft recovery audio bridge rectifiers diodes
• Independent power supply for controller, relay coils, triggers, LEDs
• Remote control handset controls all functions
• Discrete IR codes for remote control
• Four 12v trigger output jacks for power amp auto turn-on:
• Two 12v trigger jacks are switched by the remote handset
• Two 12v trigger jacks are live when the JC 2 is turned on
• Two-way RS-232 serial port connection
• Line level inputs only; no inputs for phono
• Audio mute is switched by independent L & R relays
• Rear panel IR repeater input & loop out jacks
• Premium detachable heavy gauge IEC AC cord
• 2 6’ (2m) trigger wires included
• Remote handset also controls Parasound Halo T 3 Tuner
• 3u chassis, rack-mountable

Parasound Halo JC 1

Single Channel Power Amplifier

Prezzo: 5490 €

Continuous power output, 20Hz – 20 kHz:
400 watts RMS x 1, 8 Ω
800 watts RMS x 1, 4 Ω
1200 watts RMS x 1, 2 Ω

Class A power output, 20Hz – 20 kHz:
25 watts, bias set to high, 8 Ω
10 watts, bias set to low, 8 Ω

Current capacity:
135 amperes peak

Power bandwidth:
2 Hz – 120 kHz, +0/-3 dB at 1 watt

Total harmonic distortion:
< 0.15 % at full power

IM distortion: balanced 16 V rms
< 0.03 %

Slew rate:
> 130 V/µsecond

Dynamic headroom:
> 1.8 dB

Input sensitivity:
1 V for 28.28 V, THX Reference Level

Input impedance:
100 k Ω

S/N ratio:
>120 dB, IHF A-weighted, bias set to high
>122 dB, IHF A-weighted, bias set to low

Damping factor:
> 1200 at 20 Hz

Power Requirement :
250 watts idle 1280 watts full power into 4 Ω

DC trigger output capacity :
+12 Vdc, 150 mA

Dimensions:
17-1/4″ w x 7-5/8″ h x 20 ” d, 7 ” h without feet

Net weight: 64 lb.

• Premier monaural amplifier
• Circuitry designed by legendary John Curl and CTC Builder
• Ultra-high bias Class A/AB operation
• Exclusive two position bias level adjustment
• Balanced inputs with discrete circuits and XLR connectors
• Vampire Direct gold-plated OFC RCA input
• Dual heavy-duty 24k gold-plated 5-way speaker binding posts
• Direct Coupled – no capacitors or inductors in signal path
• Complementary MOSFET driver stage and JFET input stage
• 18 beta-matched 15 amp, 60 MHz bipolar output transistors
• 1.9 kVA encapsulated toroid power transformer
• Independent power supplies for input, driver and output stages
• 18,000 µF filters for driver stage
• 132,000 µF Nichicon “Gold Tune” filters for output stage
• DC Servo and relay protection circuits
• REL and Nichicon “Muse” capacitors
• Harris hyper-fast soft recovery diodes for all bridge rectifiers
• Auto turn-on by 12v trigger or audio signal trigger
• Ground lift switch , adjustable turn-on delay
• 4u Chassis with rear carry handles, rack mounting kit included
• Premium detachable AWG 12 power cord with silver solder
• THX Ultra2 certified